Unit Overview/Summary:  Summary  The unit organizes performance expectations around the theme of energy transfer and information transmission. Instruction developed from this unit should always maintain the three-dimensional nature of the standards, but recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  The idea that energy can be moved from place to place by moving objects or through sound, light, or electric currents (PS3.A as in 4-PS3-2) connects to the idea that electric currents can be used locally to produce motion, sound, heat, or light; the currents may have been produced to begin with by transforming the energy of motion into electrical energy (PS3.B as in 4-PS3-4).  Just as energy can be transferred from place to place, digitized information can be transmitted over long distances without significant degradation. High-tech devices, such as computers or cell phones, can receive and decode information—convert it from digitized form to voice—and vice versa (PS4.C as in 4-PS4-3) Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of planning and carrying out investigations (4-PS3- 2) and constructing explanations and designing solutions (4-PS3-4 and 4-PS4-3). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (4-PS4-3) and Energy and Matter (4-PS3-2 and 4-PS3-4). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary: Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  The idea that energy can be moved from place to place by moving objects or through sound, light, or electric currents (PS3.A as in 4-PS3-2) connects to the idea that electric currents can be used locally to produce motion, sound, heat, or light; the currents may have been produced to begin with by transforming the energy of motion into electrical energy (PS3.B as in 4-PS3-4).  Just as energy can be transferred from place to place, digitized information can be transmitted over long distances without significant degradation. High-tech devices, such as computers or cell phones, can receive and decode information—convert it from digitized form to voice—and vice versa (PS4.C as in 4-PS4-3) Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of planning and carrying out investigations (4-PS3- 2) and constructing explanations and designing solutions (4-PS3-4 and 4-PS4-3). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs) Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (4-PS4-3) and Energy and Matter (4-PS3-2 and 4-PS3-4). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations.  Connections between unit Disciplinary Core Ideas (DCIs)    The concept that the faster a given object is moving, the more energy it possesses (PS3.A as in 4-PS3-1) connects to many other ideas about energy in this unit, including the idea that energy is present whenever there are moving objects (PS3.B as in 4-PS3-3), and that when objects collide, the contact forces transfer energy so as to change the objects’ motion (PS3.C as in 4-PS3-3).  The engineering design idea that different solutions need to be tested in order to determine which of them best solves the problem, given the criteria and the constraints (ETS1.C as in 3-5-ETS1-3) can be applied to multiple science concepts in this unit, such as that the faster a given object is moving, the more energy it possesses (PS3.A as in 4-PS3-1) and when objects collide, energy can be transferred from one object to another, thereby changing their motion (PS3.A as in 4-PS3- 3). Connections could be made through engineering design challenges, such as one in which students attempt to reduce or increase the amount of energy a moving object has, or one in which students attempt to reduce or increase the amount of energy transferred from one object to another in a collision. In either case, different student solutions could be tested to determine which best meets the criteria within the identified constraints. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of asking questions and defining problems (4-PS3- 3), developing and using models (4-PS4-1), planning and carrying out investigations (3-5-ETS1-3), and constructing explanations and designing solutions (4-PS3- 1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (4-PS4-1) and Energy and Matter (4-PS3-1 and 4-PS3-3). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary: Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  The concept that the faster a given object is moving, the more energy it possesses (PS3.A as in 4-PS3-1) connects to many other ideas about energy in this bundle, including the idea that energy is present whenever there are moving objects (PS3.B as in 4-PS3-3), and that When objects collide, the contact forces transfer energy so as to change the objects’ motion (PS3.C as in 4-PS3-3).  The engineering design idea that different solutions need to be tested in order to determine which of them best solves the problem, given the criteria and the constraints (ETS1.C as in 3-5-ETS1-3) can be applied to multiple science concepts in this bundle, such as that the faster a given object is moving, the more energy it possesses (PS3.A as in 4-PS3-1) and when objects collide, energy can be transferred from one object to another, thereby changing their motion (PS3.A as in 4-PS3- 3). Connections could be made through engineering design challenges, such as one in which students attempt to reduce or increase the amount of energy a moving object has, or one in which students attempt to reduce or increase the amount of energy transferred from one object to another in a collision. In either case, different student solutions could be tested to determine which best meets the criteria within the identified constraints. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of asking questions and defining problems (4-PS3- 3), developing and using models (4-PS4-1), planning and carrying out investigations (3-5-ETS1-3), and constructing explanations and designing solutions (4-PS3- 1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (4-PS4-1) and Energy and Matter (4-PS3-1 and 4-PS3-3). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  The idea that when waves move across the surface of deep water, there is no net motion in the direction of the wave except when the water meets a beach (PS4.A as in 4-PS4-1) connects to the idea that a variety of hazards results from natural processes such as tsunamis, earthquakes, volcanic eruptions (ESS3.B as in 4-ESS3- 2). The idea that most earthquakes and volcanoes occur in bands that are often along the boundaries between continents and oceans (ESS2.B as in 4-ESS2-2) also connects to the idea that humans cannot eliminate the hazards but can take steps to reduce their impacts (ESS3.B as in 4-ESS3-2). This concept that humans can affect the natural world and can change the way it affects us could also connect to the idea that energy and fuels that humans use are derived from natural sources, and their use affects the environment in multiple ways (ESS3.A as in 4-ESS3-1). The engineering design idea that communicating with peers about proposed solutions is an important part of the design process, and shared ideas can lead to improved designs. (ETS1.B as in 3-5-ETS1-2) could be applied to multiple science concepts, such as that energy and fuels that humans use are derived from natural sources, and their use affects the environment in multiple ways (ESS3.A as in 4-ESS3-1) and that humans cannot eliminate the hazards from natural processes (e.g., earthquakes, tsunamis, volcanic eruptions) but can take steps to reduce their impacts (ESS3.B as in 4-ESS3-2). Connections could be made through tasks such as identifying solutions to reduce human impacts on the environment from energy and fuel use, and identifying solutions that reduce the impacts of hazards from natural processes. For either connection, students should communicate with their peers about solutions and reflect on how such communication can lead to improved solutions. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of developing and using models (4-PS4-1), planning and carrying out investigations (4-ESS2-1), analyzing and interpreting data (4-ESS2-2), and constructing explanations and designing solutions (4-ESS3-2 and 3-5-ETS1-2), and obtaining, evaluating, and communicating information (4-ESS3-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (4-PS4-1 and 4-ESS2-2) and Cause and Effect (4-ESS3-1 and 4-ESS3-2). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  The idea that when waves move across the surface of deep water, there is no net motion in the direction of the wave except when the water meets a beach (PS4.A as in 4-PS4-1) connects to the idea that a variety of hazards results from natural processes such as tsunamis, earthquakes, volcanic eruptions (ESS3.B as in 4-ESS3- 2). The idea that most earthquakes and volcanoes occur in bands that are often along the boundaries between continents and oceans (ESS2.B as in 4-ESS2-2) also connects to the idea that humans cannot eliminate the hazards but can take steps to reduce their impacts (ESS3.B as in 4-ESS3-2). This concept that humans can affect the natural world and can change the way it affects us could also connect to the idea that energy and fuels that humans use are derived from natural sources, and their use affects the environment in multiple ways (ESS3.A as in 4-ESS3-1). The engineering design idea that communicating with peers about proposed solutions is an important part of the design process, and shared ideas can lead to improved designs. (ETS1.B as in 3-5-ETS1-2) could be applied to multiple science concepts, such as that energy and fuels that humans use are derived from natural sources, and their use affects the environment in multiple ways (ESS3.A as in 4-ESS3-1) and that humans cannot eliminate the hazards from natural processes (e.g., earthquakes, tsunamis, volcanic eruptions) but can take steps to reduce their impacts (ESS3.B as in 4-ESS3-2). Connections could be made through tasks such as identifying solutions to reduce human impacts on the environment from energy and fuel use, and identifying solutions that reduce the impacts of hazards from natural processes. For either connection, students should communicate with their peers about solutions and reflect on how such communication can lead to improved solutions. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of developing and using models (4-PS4-1), planning and carrying out investigations (4-ESS2-1), analyzing and interpreting data (4-ESS2-2), and constructing explanations and designing solutions (4-ESS3-2 and 3-5-ETS1-2), and obtaining, evaluating, and communicating information (4-ESS3-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (4-PS4-1 and 4-ESS2-2) and Cause and Effect (4-ESS3-1 and 4-ESS3-2). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  NGSS Disciplinary Core Ideas (DCIs ) are fundamental scientific ideas that form the content of an NGSS curriculum.  They cover four domains: physical science, life science, earth, and space science, as well as engineering, technology, and applications of science. NGSS core ideas represent the main domains of factual understanding that students should develop within each discipline.The idea that being part of a group helps animals obtain food, defend themselves, and cope with changes (LS2.D as in 3-LS2-1) connects to the idea that reproduction is essential to the continued existence of every kind of organism (LS1.B as in 3-LS1-1) through the concept of survival of organisms. Reproduction also connects to the concept of inheritance and that many characteristics of organisms are inherited from their parents (LS3.A as in 3-LS3-1). Other characteristics result from individuals’ interactions with the environment, which can range from diet to learning. Many characteristics involve both inheritance and environment (LS3.A as in 3-LS3-2).  All the previous concepts also connect to each other through the concept of patterns: patterns of reproduction and life cycles across organisms, and patterns of characteristics of organisms, both inherited and from interactions with the environment. The concept of patterns also allows students to begin studying the idea that scientists record patterns of the weather across different times and areas so that they can make predictions about what kind of weather might happen next (ESS2.D as in 3-ESS2-1). This idea will be further developed in subsequent unit. Unit Science and Engineering Practices (SEPs)The practices describe behaviors that scientists engage in as they investigate and build models and theories about the natural world and the key set of engineering practices that engineers use as they design and build models and systems.Instruction leading to this unit of performance expecations (PEs) will help students build toward proficiency in elements of the practices of developing and using models (3-LS1-1), analyzing and interpreting data (3-LS3-1 and 3-ESS2-1), constructing explanations and designing solutions (3-LS3-2), and engaging in argument from evidence (3-LS2-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of performance expecations (PEs) will help students build toward proficiency in elements of the crosscutting concepts of Patterns (3-LS1-1, 3-LS3-1, and 3- ESS2-1) and Cause and Effect (3-LS2-1 and 3-LS3-2). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  NGSS Disciplinary Core Ideas (DCIs ) are fundamental scientific ideas that form the content of an NGSS curriculum.  They cover four domains: physical science, life science, earth, and space science, as well as engineering, technology, and applications of science. NGSS core ideas represent the main domains of factual understanding that students should develop within each discipline.The idea that being part of a group helps animals obtain food, defend themselves, and cope with changes (LS2.D as in 3-LS2-1) connects to the idea that reproduction is essential to the continued existence of every kind of organism (LS1.B as in 3-LS1-1) through the concept of survival of organisms. Reproduction also connects to the concept of inheritance and that many characteristics of organisms are inherited from their parents (LS3.A as in 3-LS3-1). Other characteristics result from individuals’ interactions with the environment, which can range from diet to learning. Many characteristics involve both inheritance and environment (LS3.A as in 3-LS3-2).  All the previous concepts also connect to each other through the concept of patterns: patterns of reproduction and life cycles across organisms, and patterns of characteristics of organisms, both inherited and from interactions with the environment. The concept of patterns also allows students to begin studying the idea that scientists record patterns of the weather across different times and areas so that they can make predictions about what kind of weather might happen next (ESS2.D as in 3-ESS2-1). This idea will be further developed in subsequent unit. Unit Science and Engineering Practices (SEPs)The practices describe behaviors that scientists engage in as they investigate and build models and theories about the natural world and the key set of engineering practices that engineers use as they design and build models and systems.Instruction leading to this unit of performance expecations (PEs) will help students build toward proficiency in elements of the practices of developing and using models (3-LS1-1), analyzing and interpreting data (3-LS3-1 and 3-ESS2-1), constructing explanations and designing solutions (3-LS3-2), and engaging in argument from evidence (3-LS2-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of performance expecations (PEs) will help students build toward proficiency in elements of the crosscutting concepts of Patterns (3-LS1-1, 3-LS3-1, and 3- ESS2-1) and Cause and Effect (3-LS2-1 and 3-LS3-2). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations.  Connections between unit Disciplinary Core Ideas (DCIs)   The idea that rainfall, water, ice, wind, and living organisms help to shape the land (ESS2.A as in 4-ESS2-1) connects to the idea waves, which are regular patterns of motion, can be made in water by disturbing the surface, and can cause objects to move (PS4.A as in 4-PS4-1).  Another concept related to affecting the land is that living things affect the physical characteristics of their regions (ESS2.E as in 4-ESS2-1). And the relationship between living things and the land connects to the ideas that the presence and location of certain fossil types indicate the order in which rock layers were formed (ESS1.C as in 4-ESS1-1), and that rainfall affects the types of living things found in a region (ESS2.A as in 4-ESS2-1).  The engineering design idea that testing a solution involves investigating how well it performs under a range of likely conditions (ETS1.B as in 3-5-ETS1-2) could be applied to multiple science concepts such as that water, ice, wind, living organisms, and gravity break rocks, soils, and sediments into smaller particles and move them around (ESS2.A as in 4-ESS2-1), and that waves can cause objects to move (PS4.A as in 4-PS4-1). Connections could be made through tasks such as by having students design a solution to reduce effects of erosion by wind, or by having students design a solution to ocean waves moving beach sand. Either kind of design should be tested within a range of likely conditions since rates of erosion can vary, as can the size of waves. Unit Science and Engineering Practices (SEPs) Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of developing and using models (4-PS4-1), planning and carrying out investigations (4-ESS2-1), and constructing explanations and designing solutions (4-ESS1-1 and 3-5-ETS1-2). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (4-PS4-1 and 4-ESS1-1) and Cause and Effect (4-ESS2-1). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  The idea that rainfall, water, ice, wind, and living organisms help to shape the land (ESS2.A as in 4-ESS2-1) connects to the idea waves, which are regular patterns of motion, can be made in water by disturbing the surface, and can cause objects to move (PS4.A as in 4-PS4-1).  Another concept related to affecting the land is that living things affect the physical characteristics of their regions (ESS2.E as in 4-ESS2-1). And the relationship between living things and the land connects to the ideas that the presence and location of certain fossil types indicate the order in which rock layers were formed (ESS1.C as in 4-ESS1-1), and that rainfall affects the types of living things found in a region (ESS2.A as in 4-ESS2-1).  The engineering design idea that testing a solution involves investigating how well it performs under a range of likely conditions (ETS1.B as in 3-5-ETS1-2) could be applied to multiple science concepts such as that water, ice, wind, living organisms, and gravity break rocks, soils, and sediments into smaller particles and move them around (ESS2.A as in 4-ESS2-1), and that waves can cause objects to move (PS4.A as in 4-PS4-1). Connections could be made through tasks such as by having students design a solution to reduce effects of erosion by wind, or by having students design a solution to ocean waves moving beach sand. Either kind of design should be tested within a range of likely conditions since rates of erosion can vary, as can the size of waves. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of developing and using models (4-PS4-1), planning and carrying out investigations (4-ESS2-1), and constructing explanations and designing solutions (4-ESS1-1 and 3-5-ETS1-2). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs) Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (4-PS4-1 and 4-ESS1-1) and Cause and Effect (4-ESS2-1). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

CSDE Model Curricula Quick Start GuideEquitable and Inclusive Curriculum  The CSDE believes in providing a set of conditions where learners are repositioned at the center of curricula planning and design. Curricula, from a culturally responsive perspective, require intentional planning for diversity, equity, and inclusion in the development of units and implementation of lessons. It is critical to develop a learning environment that is relevant to and reflective of students’ social, cultural, and linguistic experiences to effectively connect their culturally and community-based knowledge to the class. Begin by connecting what is known about students’ cognitive and interdisciplinary diversity to the learning of the unit. Opposed to starting instructional planning with gaps in students’ knowledge, plan from an asset-based perspective by starting from students’ strengths. In doing so, curricula’s implementation will be grounded in instruction that engages, motivates, and supports the intellectual capacity of all students. Course Description: Three-Dimensional Learning shifts the focus of the science classroom to environments where students use disciplinary core ideas, crosscutting concepts with scientific practices to explore, examine, and explain how and why phenomena occur and to design solutions to problems. Three-dimensional learning helps students build their research, communication, and analytical thinking skills.More informational regarding Three-Dimensional learning can be accessed at the following address:What exactly IS three-dimensional learning? | Teaching ChannelEach year, students in Connecticut should be able to demonstrate greater capacity for connecting knowledge across, and between, the physical sciences, life sciences, earth and space sciences, and engineering design. During Grade 5, students will begin to form deeper connections between concepts previously learned in grades K–4, such as collecting evidence and drawing conclusions, understanding relationships between objects, and critical thinking that leads to designing effective solutions for problems. Upon completion of Grade 5, students should have a deeper understanding of: Understanding of Matter and Energy in Organisms and Ecosystems Identification of Earth's Systems Familiarization of Structure and Properties of Matter Realization of Space Systems: Stars and the Solar System Optimize design solutions. Aligned Core Resources:Core resources is a local control decision.  Ensuring alignment of resources to the standards is critical for success. Alignment of all content materials across the grades and vertically in the grade band must be communicated to all staff. Additional Course Information: NGSS has unique features. To better understand the make-up of NGSS visit the following website for a more detailed break-down of the CT Science standards from which this curriculum was based.  Nextgenscience  Assessment Information:There are many ways to assess student learning. Besides annual statewide summative testing, the Connecticut State Department of Education has developed NGSS Interim Assessment blocks specific to the grade 3 – 5 grade band. These can be accessed through the CSDE Website in the Performance Office tab. Many websites also offer assessment materials aligned to the NGSS, specifically through the NSTA, and Defined Learning. ELA/Math Transferable Skills Addressed in the Course: The following Practices Venn Diagram illustrates the connections and commonalities in the major content areas. This diagram attempts to cluster practices and capacities that have similar tenets and/or significant overlaps in the student expectations. Likewise, we have placed practices and capacities within the disciplinary domains if there was not a significant overlap or relationship to another discipline. One could argue certain practices/capacities could be placed in other positions within the Venn diagram. These placements are not definitive and the intention of the standards documents may not have conceptualized the three disciplinary areas In this manner.  ​

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)   The disciplinary core ideas in this unit are linked through the concept of Earth’s major systems. The idea that matter of any type can be subdivided into particles that are too small to see (PS1.A as in 5-PS1-1) can connect to the concept that Earth’s major systems interact in multiple ways to affect Earth’s surface materials and processes (ESS2.A as in 5-ESS2-1), since matter sometimes moves through the systems as particles that are too small to see.  Earth’s major systems also connect to the concept that nearly all of Earth’s available water is in the ocean, and most fresh water is in glaciers or underground; only a tiny fraction is in streams, lakes, wetlands, and the atmosphere (ESS2.C as in 5-ESS2-2) as this concept is about the hydrosphere.  The Earth’s major systems are affected by gravity as the gravitational force of Earth acting on an object near Earth’s surface pulls that object toward the planet’s center (PS2.B as in 5-PS2-1). Finally, the idea that human activities in agriculture, industry, and everyday life have had major effects on the land, vegetation, streams, ocean, and air also connects to our understanding of Earth’s major systems.  The engineering design concept that different proposals for solutions can be compared on the basis of how well each one meets the specified criteria for success (ETS1.A as in 3-5-ETS1-1) could connect to multiple science concepts, such as that the ocean supports a variety of ecosystems and organisms (ESS2.A as in 5- ESS2-1) and that nearly all of Earth’s available water is in the ocean, and most fresh water is in glaciers or underground; only a tiny fraction is in streams, lakes, wetlands, and the atmosphere (ESS2.C as in 5-ESS2-2). The first connection could be made by having students propose solutions regarding threatened ecosystems that are supported by the ocean. The second connection could be made by having students design processes to locate and identify drinkable water. In either case, students should have an opportunity to compare different proposals on the basis of how well they meet given criteria. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of asking questions and defining problems (3-5- ETS1-1); developing and using models (5-PS1-1 and 5-ESS2-1); using mathematical and computational thinking (5-ESS2-2); engaging in argument from evidence (5-PS2-1); and obtaining, evaluating, and communicating information (5-ESS3-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (5-ESS1-2); Cause and Effect (5-PS2-1); Scale, Proportion, and Quantity (5-PS1-1 and 5-ESS2-2); and Systems and System Models (5-ESS2-1). Many other crosscutting concepts elements can be used in instruction. 

Unit Overview/Summary:Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)    The disciplinary core ideas in this unit are linked through the concept of Earth’s major systems. The idea that matter of any type can be subdivided into particles that are too small to see (PS1.A as in 5-PS1-1) can connect to the concept that Earth’s major systems interact in multiple ways to affect Earth’s surface materials and processes (ESS2.A as in 5-ESS2-1), since matter sometimes moves through the systems as particles that are too small to see.  Earth’s major systems also connect to the concept that nearly all of Earth’s available water is in the ocean, and most fresh water is in glaciers or underground; only a tiny fraction is in streams, lakes, wetlands, and the atmosphere (ESS2.C as in 5-ESS2-2) as this concept is about the hydrosphere.  The Earth’s major systems are affected by gravity as the gravitational force of Earth acting on an object near Earth’s surface pulls that object toward the planet’s center (PS2.B as in 5-PS2-1). Finally, the idea that human activities in agriculture, industry, and everyday life have had major effects on the land, vegetation, streams, ocean, and air also connects to our understanding of Earth’s major systems.  The engineering design concept that different proposals for solutions can be compared on the basis of how well each one meets the specified criteria for success (ETS1.A as in 3-5-ETS1-1) could connect to multiple science concepts, such as that the ocean supports a variety of ecosystems and organisms (ESS2.A as in 5- ESS2-1) and that nearly all of Earth’s available water is in the ocean, and most fresh water is in glaciers or underground; only a tiny fraction is in streams, lakes, wetlands, and the atmosphere (ESS2.C as in 5-ESS2-2). The first connection could be made by having students propose solutions regarding threatened ecosystems that are supported by the ocean. The second connection could be made by having students design processes to locate and identify drinkable water. In either case, students should have an opportunity to compare different proposals on the basis of how well they meet given criteria. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of asking questions and defining problems (3-5- ETS1-1); developing and using models (5-PS1-1 and 5-ESS2-1); using mathematical and computational thinking (5-ESS2-2); engaging in argument from evidence (5-PS2-1); and obtaining, evaluating, and communicating information (5-ESS3-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (5-ESS1-2); Cause and Effect (5-PS2-1); Scale, Proportion, and Quantity (5-PS1-1 and 5-ESS2-2); and Systems and System Models (5-ESS2-1). Many other crosscutting concepts elements can be used in instruction. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs) The idea that matter cycles between the air and soil and among plants, animals, and microbes as these organisms live and die (LS2.B as in 5-LS2-1) connects to the idea that matter of any type can be subdivided into particles that are too small to see (PS1.A as in 5-PS1-1) because matter is subdivided into particles as it flows between organisms and the air and soil. The idea that matter flows also connect to the ideas that plants acquire their material for growth chiefly from air and water (LS1.C as in 5-LS1-1) and that food provides animals with the materials they need for body repair and growth (LS1.C in 5-PS3-1).  Just as matter flows, energy can flow as well. As such, the idea that matter can flow connects to the concept that the energy released [from] food was once energy from the sun that was captured by plants in the chemical process that forms plant matter (PS3.D as in 5-PS3-1).  The engineering design concept that communicating with peers about proposed solutions is an important part of the design process, and shared ideas can lead to improved designs (ETS1.B as in 3-5-ETS1-2) could connect to multiple science concepts, such as that a healthy ecosystem is one in which multiple species of different types are each able to meet their needs in a relatively stable web of life (LS2.A as in 5-LS2-1) and that gases are made from matter particles that are too small to see and are moving freely around in space (PS1.A as in 5-PS1-1). The first connection could be made through having students share designs for solutions to improve the health of a given ecosystem. The second connection could be made by having students share design for a device that uses the understanding that gases are made from matter particles too small to see. In either case, students should have an opportunity to communicate with their peers throughout the design process and reflect on how sharing their ideas affected their designs. Unit Science and Engineering Practices (SEPs) Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of developing and using models (5-PS1-1, 5-PS3-1, and 5-LS2-1); constructing explanations and designing solutions (3-5-ETS1-2); and engaging in argument from evidence (5-LS1-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Scale, Proportion, and Quantity (5- PS1-1); Systems and System Models (5-LS2-1); and Energy and Matter (5-PS3-1 and 5-LS1-1). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. . Connections between unit Disciplinary Core Ideas (DCIs)   The idea that matter cycles between the air and soil and among plants, animals, and microbes as these organisms live and die (LS2.B as in 5-LS2-1) connects to the idea that matter of any type can be subdivided into particles that are too small to see (PS1.A as in 5-PS1-1) because matter is subdivided into particles as it flows between organisms and the air and soil. The idea that matter flows also connect to the ideas that plants acquire their material for growth chiefly from air and water (LS1.C as in 5-LS1-1) and that food provides animals with the materials they need for body repair and growth (LS1.C in 5-PS3-1).  Just as matter flows, energy can flow as well. As such, the idea that matter can flow connects to the concept that the energy released [from] food was once energy from the sun that was captured by plants in the chemical process that forms plant matter (PS3.D as in 5-PS3-1).  The engineering design concept that communicating with peers about proposed solutions is an important part of the design process, and shared ideas can lead to improved designs (ETS1.B as in 3-5-ETS1-2) could connect to multiple science concepts, such as that a healthy ecosystem is one in which multiple species of different types are each able to meet their needs in a relatively stable web of life (LS2.A as in 5-LS2-1) and that gases are made from matter particles that are too small to see and are moving freely around in space (PS1.A as in 5-PS1-1). The first connection could be made through having students share designs for solutions to improve the health of a given ecosystem. The second connection could be made by having students share design for a device that uses the understanding that gases are made from matter particles too small to see. In either case, students should have an opportunity to communicate with their peers throughout the design process and reflect on how sharing their ideas affected their designs. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of developing and using models (5-PS1-1, 5-PS3-1, and 5-LS2-1); constructing explanations and designing solutions (3-5-ETS1-2); and engaging in argument from evidence (5-LS1-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Scale, Proportion, and Quantity (5- PS1-1); Systems and System Models (5-LS2-1); and Energy and Matter (5-PS3-1 and 5-LS1-1). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations.  Connections between unit Disciplinary Core Ideas (DCIs)  The idea that matter of any type can be subdivided into particles that are too small to see (PS1.A as in 5-PS1-1) connects to the idea that the amount (weight) of matter is conserved when it changes form, even in transitions in which it seems to vanish (PS1.A as in 5-PS1-2). The total weight of substances also does not change no matter what reaction or change in properties occurs (PS1.B as in 5-PS1-2). Change in properties connects to the idea that when two or more different substances are mixed, a new substance with different properties may be formed (PS1.B as in 5-PS1-4). Measurements of a variety of properties can be used to identify materials (PS1.A as in 5-PS1-3), including the new ones that may be formed when two or more substances are mixed.  The engineering design idea that different solutions need to be tested in order to determine which of them best solves the problem, given the criteria and the constraints (ETS1.C as in 3-5-ETS1-3) could connect to multiple science concepts, such as that when two or more different substances are mixed, a new substance with different properties may be formed (PS1.B as in 5-PS1-4), and that measurements of a variety of properties can be used to identify materials (PS1.A as in 5- PS1-3). Students can be challenged to create a new substance with particular properties (i.e., given criteria). In order to test the solution, measurements of the properties need to be taken to determine that the new substance with the desired properties has been created.  Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of developing and using models (5-PS1-1); planning and carrying out investigations (5-PS1-3, 5-PS1-4, and 3-5-ETS1-3); and using mathematics and computational thinking (5-PS1-2). Many other practice elements can be used in instruction.  Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Cause and Effect (5-PS1-4) and Scale, Proportion, and Quantity (5-PS1-1, 5-PS1-2, and 5-PS1-3). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  The idea that matter of any type can be subdivided into particles that are too small to see (PS1.A as in 5-PS1-1) connects to the idea that the amount (weight) of matter is conserved when it changes form, even in transitions in which it seems to vanish (PS1.A as in 5-PS1-2). The total weight of substances also does not change no matter what reaction or change in properties occurs (PS1.B as in 5-PS1-2). Change in properties connects to the idea that when two or more different substances are mixed, a new substance with different properties may be formed (PS1.B as in 5-PS1-4). Measurements of a variety of properties can be used to identify materials (PS1.A as in 5-PS1-3), including the new ones that may be formed when two or more substances are mixed.  The engineering design idea that different solutions need to be tested in order to determine which of them best solves the problem, given the criteria and the constraints (ETS1.C as in 3-5-ETS1-3) could connect to multiple science concepts, such as that when two or more different substances are mixed, a new substance with different properties may be formed (PS1.B as in 5-PS1-4), and that measurements of a variety of properties can be used to identify materials (PS1.A as in 5- PS1-3). Students can be challenged to create a new substance with particular properties (i.e., given criteria). In order to test the solution, measurements of the properties need to be taken to determine that the new substance with the desired properties has been created.  Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of developing and using models (5-PS1-1); planning and carrying out investigations (5-PS1-3, 5-PS1-4, and 3-5-ETS1-3); and using mathematics and computational thinking (5-PS1-2). Many other practice elements can be used in instruction.  Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Cause and Effect (5-PS1-4) and Scale, Proportion, and Quantity (5-PS1-1, 5-PS1-2, and 5-PS1-3). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)  The idea that the sun is a star that appears larger and brighter than other stars because it is closer (ESS1.A as in 5-ESS1-1) connects to the idea that there are observable patterns – such as different positions of the sun at different times of the day, month, and year – caused by the orbits of Earth around the sun and of the moon around Earth, together with the rotation of Earth about an axis (ESS1.B as in 5-ESS1-2), as both address the appearance of objects in the sky based on our position relative to other objects in the solar system and universe. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of analyzing and interpreting data (5-ESS1-2) and engaging in argument from evidence (5-ESS1-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (5-ESS1-2) and Scale, Proportion, and Quantity (5-ESS1-1). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

Unit Overview/Summary:  Summary  The unit organizes performance expectations with a focus on helping students build understanding of traits of organisms. Instruction developed from this unit should always maintain the three-dimensional nature of the standards and recognize that instruction is not limited to the practices and concepts directly linked with any of the unit performance expectations. Connections between unit Disciplinary Core Ideas (DCIs)   The idea that the sun is a star that appears larger and brighter than other stars because it is closer (ESS1.A as in 5-ESS1-1) connects to the idea that there are observable patterns – such as different positions of the sun at different times of the day, month, and year – caused by the orbits of Earth around the sun and of the moon around Earth, together with the rotation of Earth about an axis (ESS1.B as in 5-ESS1-2), as both address the appearance of objects in the sky based on our position relative to other objects in the solar system and universe. Unit Science and Engineering Practices (SEPs)Instruction leading to this unit of PEs will help students build toward proficiency in elements of the practices of analyzing and interpreting data (5-ESS1-2) and engaging in argument from evidence (5-ESS1-1). Many other practice elements can be used in instruction. Unit Crosscutting Concepts (CCCs)Crosscutting concepts have value because they provide students with connections and intellectual tools that are related across the differing areas of disciplinary content and can enrich their application of practices and their understanding of core ideas. As such, they are a way of linking the different domains of science.Instruction leading to this unit of PEs will help students build toward proficiency in elements of the crosscutting concepts of Patterns (5-ESS1-2) and Scale, Proportion, and Quantity (5-ESS1-1). Many other crosscutting concepts elements can be used in instruction. All instruction should be three-dimensional. 

​ OpenSciEd Demo Video ​OpenSciEd Scope & Sequence VideoCSDE Model Curricula Quick Start Guide Equitable and Inclusive Curriculum  The CSDE believes in providing a set of conditions where learners are repositioned at the center of curricula planning and design. Curricula, from a culturally responsive perspective, require intentional planning for diversity, equity, and inclusion in the development of units and implementation of lessons. It is critical to develop a learning environment that is relevant to and reflective of students’ social, cultural, and linguistic experiences to effectively connect their culturally and community-based knowledge to the class. Begin by connecting what is known about students’ cognitive and interdisciplinary diversity to the learning of the unit. Opposed to starting instructional planning with gaps in students’ knowledge, plan from an asset-based perspective by starting from students’ strengths. In doing so, curricula’s implementation will be grounded in instruction that engages, motivates, and supports the intellectual capacity of all students.Course Description: Using 3-Dimesional design pedagogy, Connecticut’s NGSS employ: Science/Engineering Practices, Disciplinary Core Ideas (DCI’s) and Crosscutting Concepts that are used to make up Student Expectations: ​Each year, students in Connecticut should be able to demonstrate greater capacity for connecting knowledge across, and between, the physical sciences, life sciences, earth and space sciences, and engineering design. During Grade 6, students will begin to form deeper connections between concepts previously learned in grades K–5, such as collecting evidence and drawing conclusions, understanding relationships between objects, and critical thinking that leads to designing effective solutions for problems. Upon completion of Grade 6, students should have a deeper understanding of: • Physical and chemical interactions that affect the world around us;• Factors that affect organism survival and reproduction; • Factors that influence the Earth and our solar system including important concepts regarding climate and changes in climate/weather; and • How to optimize design solutions.Aligned Core Resources:Core resources is a local control decision.  Ensuring alignment of resources to the standards is critical for success. The CSDE has identified OpenSciEd as a highly aligned core resource after a rigorous review process. Additional Course Information: NGSS has unique features. To better understand the make-up of NGSS visit the following website for a more detailed break-down of the CT Science standards from which this curriculum was based. Nextgenscience Assessment Information:To support teachers with being able to use the OpenSciEd instructional materials, a set of professional learning resources has been developed that accompany each unit. All of the resources can be accessed by adding them to your Google Drive or by downloading into Microsoft Office documents from the Google Drive folder using the links below. To access the student and teacher versions of these units, visit the Instructional Materials Page.Additionally, the Connecticut State Department of Education has developed NGSS interim Assessment blocks specific to the grade 6-8 grade band. These can be accessed through the CSDE Website in the Performance Office tab.ELA/Math Transferable Skills Addressed in the Course: The following Practices Venn Diagram illustrates the connections and commonalities in the major content areas. This diagram attempts to cluster practices and capacities that have similar tenets and/or significant overlaps in the student expectations. Likewise, we have placed practices and capacities within the disciplinary domains if there was not a significant overlap or relationship to another discipline. One could argue certain practices/capacities could be placed in other positions within the Venn diagram. These placements are not definitive and the intention of the standards documents may not have conceptualized the three disciplinary areas In this manner. ​